Beacon Heights’ selection of specialty coatings ranges from the very best in Benjamin Moore primers to the complete line of INSL-X products, including primers, garage floor sealants, concrete stain, pool paint, and zone-marking traffic paint.
The Fresh Start High-Hiding All Purpose Primer by Benjamin Moore adheres to all surfaces exceptionally well, providing the ultimate base for a smooth, durable, and beautiful topcoat. Delivering maximum hide, this 100% acrylic primer is the best choice for when you are significantly changing a colour. It dries fast, has low VOCs, blocks stains and is mildew resistant.
The Fresh Start Multi-Purpose Oil Based Primer is a high-quality alkyd primer and provides a superior undercoat that will seal the surface underneath. It can go over top of oil or latex paints and underneath all of the Benjamin Moore products. It adheres fast and firm, hides everything and helps block stains.
INSL-X’s Aqua Lock Plus Multi-Purpose Primer is 100% acrylic. This water-based primer provides outstanding stain blocking on most surfaces. It can be used both indoors and outdoors, dries very quickly, and can be topped with both latex and oil-based paints after only one hour. It is also mold-resistant.
The go-to choice for cabinet repainting applications, the STIX Waterborne Bonding Primer by INSL-X has the unique ability to create a tight bond onto almost any surface, including melamine or other veneers, glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fibreglass, and galvanized metals. It can be applied in temperatures as low as 1.5 degrees Celsius and cures to an extremely hard finish. This primer can be topped with almost every kind of paint there is, and is highly recommended for helping to transform your kitchen.
This primer by INSL-X excels at blocking stains and sealing out embedded smells caused by cigarette smoke, pets and mould. If you’re looking to seal stains on a water-damaged ceiling or reset a stubborn surface and prepare it for paint, this is the primer for you. As it contains a unique synthetic resin base, it’s also the primer of choice for repainting oak cabinetry. The Odorless Block Out Primer excels at creating a tight bond to the sanded oak surface while simultaneously blocking out tannin stains that can bleed through your first and second coats of paint.
For use on concrete garage floors, the INSL-X GarageGuard Epoxy Floor Coating is a water-based, catalyzed epoxy specially formulated with chemical, abrasion, and impact resistance. It won’t pick up rubber stains from hot tires or lift up existing coatings. Available in four colours, GarageGuard results in hard, durable, semi-gloss finish that can be recoated in 24 hours, meaning you can get back to normal faster.
For waterproofing concrete surfaces, INSL-X’s TuffCrete Waterproofing Acrylic Concrete Stain is a water-reduced acrylic coating that can be applied in one coat as a stain or in two coats for an opaque finish. Available in 10 colours and two sheens, the TuffCrete Waterproofing Acrylic Concrete Stain can help beautify dull concrete with a durable finish that will fight off stains.
The INSL-X Latex Traffic Paint was made specifically for line-marking. It comes in bright white, black, red, blue, and yellow and can be used both indoors and outdoors. An acrylic latex paint that dries extremely fast and can be applied with a brush, roller, or hand or automatic line markers.
The Benjamin Moore Floor and Patio Low Sheen Enamel is recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications. It is easy to apply, has low VOCs, and can be used on interior and exterior surfaces. Resistant to soaps and detergents, grease and oil, it is also scratch and abrasion resistant.
Formulated by Benjamin Moore to dry to a high gloss finish, the Floor and Patio High Gloss Enamel is recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications. Easy to apply, this enamel has low VOCs and can be used on interior and exterior surfaces. Resistant to soaps and detergents, grease and oil, it is also scratch and abrasion resistant.
Hands down one of the most durable finishes offered in the Benjamin Moore line up of interior/exterior coatings, the Impervex Latex Enamel High Gloss is 100% acrylic, providing excellent gloss and colour retention. This product cures to a rock hard finish that will stand the test of time. It’s only available in high gloss and is quite thick to apply, so your application technique is important. From rocking horses, to exterior man doors, to creating the most durable of commercial surfaces, if you’re ok with a glossy look, this product performs!